How to properly store bearing?
Time：2017-09-03 13:08:00Hits：570
How to properly store bearing?
1. To keep the original packaging, not arbitrarily open, and if found damaged packaging shall be open carefully cleaned and re-oiled packaging.
2. Relative humidity not exceed 60% of the storage compartment, the temperatur
How to properly store bearing
2. Relative humidity not exceed 60% of the storage compartment, the temperature difference is not too large, bearing in original packaging can be stored for several years. Sealed bearings or bearings with dust cover, after long-term storage, the lubricating properties of the bearing is filled with grease may be reduced.
3. Anti-vibration and storeroom should also be shaken. Bearings not stored in the original packaging should be kept strictly forbidden bearing and corrosive things together, to protect against corrosion and contamination.
4. Only flat when storing large rolling bearing, inner and outer rings of the best side all be supported. If stored upright, since the inner and outer rings and rolling components heavier, and inner and outer rings are relatively thin wall, it may cause permanent deformation.
- Deep groove ball bearing
- Self-aligning ball bearing
- Cylindrical roller bearing
- Spherical Roller Bearings
- Angular contact ball bearing
- Tapered roller bearing
- Thrust ball bearing
- Thrust roller bearing
- Knuckle Bearing
- Needle Roller Bearing
- Spherical Surface Ball Bearing
- Automobile bearing
- Famous Brand Bearings
